Description
Young Industries Quick Clean Rotary Valves offer a unique cantilevered design having two bearings on one end of the rotor shaft. The rotor itself is cantilevered from the bearings on the shaft and is completely removable from the valve on the opposite end of the housing. The housing is provided with a removable cover for easy access to the valve interior and removal of the rotor. The Rotor is simply pulled off the shaft and completely removed from the rotary valve assembly. Young Industries Quick Clean Cantilevered design allows complete access to the valve interior for cleaning.
Model QC
The Quick Clean Rotary Valve is available as the Model QC and Model CA styles.
The Model QC Rotary Valve is designed for easy removal of the rotor while the shaft seal is retained on the Rotary Valve Housing.
The Model CA Rotary Valve uses a chevron shaft seal assembly which is attached to the rotor. This feature allows the shaft seal of the valve to be removed with the rotor for maintenance or cleaning as needed. The Model CA Rotary Valve is used for the most sanitary applications where no tools are needed for complete dis-assembly of product contact parts.
The Model QC and Model CA Quick Clean Rotary Valves are constructed using Young Industries Model LH or HC Drop-thru Rotary Valve housings, or the Model SE Side Entry Valve housings.
Model CA
Specifications
Our Model “QC” (Quick Clean) Rotary Valves are engineered to minimize downtime in process applications and save you money with easy rotor removal and reassembly. The “QC” rotary valve has two (2) outboard ball bearings on one side with a bolt-in-place access door on the other side. The rotor shaft is sealed by four (4) packing rings of Kevlar located on the back fixed end plate with exterior packing follower and a bolted access door on other end plate provides access to the internal wetted parts.The access door can be hinged and have an “O” ring seal to prevent outside leakage.
These valves are used to reduce downtime for valve clean up; allowing removal of the rotor without removing the packing gland. No tools are required for disassembly or assembly. This valve is typically used where access to the valve’s interior is required, but total clean up of all components is not a factor.
The quick clean design modifications are available as a drop-thru airlock feeder valve with a Model “HC” (High Capacity) model or a Model “LH” (Low Headroom); or as a Model “SE” (Side Entry).
Our Model “CA” (Cantilevered) Rotary Valves use shrouded rotor designs. The “CA” valve can be furnished in the end seal design for hose applications requiring reduced air or gas leakage across the valve.
Our cantilevered high capacity (HC-CA) and low headroom (LH-CA) models have received 3A Dairy Approval as a clean in-place valve.
The “CA” rotary valve has two (2) outboard tapered roller bearings on one side of the rotor with a hinged bolt-in-place access door on the other side. The rotor shaft is sealed by four (4) PTFE Chevron seal rings located of the drive hub that can be adjusted with the the packing follower nut and drive pin. These valves are available with a wide variety of features to handle a wide range of process requirements.
Model QC
• Heavy Duty construction with 15 PSIG design
• Cast or fabricated construction of iron, carbon steel or 300 series stainless steel
• Round or square flanged connections
• Standard design/operating temperature up to 250 F
• Precision outboard bearings
• Rotor is completely removed from the valve
• Open access to valve interior
• Single shaft seal with packing gland
• Removable access door with hand knobs
Model CA
• Heavy Duty construction with 15 PSIG design
• Cast or fabricated construction of iron, carbon steel or 300 series stainless steel
• Round or square flanged connections
• Standard design/operating temperature up to 250 F
• Precision outboard bearings
• Rotor is completely removed from the valve
• Shaft seal using Chevron seal rings are attached to the rotor and removable with the rotor
• Open access to valve interior
• Removable access door with hand knobs
Model QC
• Interior Polish or electro-polish per application requirement
• Hinged access cover
• For larger size valves, removable rotor davit/ puller available
• Transflow fluidized rotor for handling the most cohesive powders
• Rotor tips can be beveled
• Replaceable rotor tips of flexible or abrasion resistant materials
• Roller chain drive with parallel shaft TEFC gearmotor is standard with explosion proof motors of any specified manufacturer available
• Exterior painting and coatings to meet customer specifications when needed
Model CA
• Interior Polish or electro-polish per application requirement
• Hinged access cover
• For larger size valves, removable rotor davit/ puller available
• Transflow fluidized rotor for handling the most cohesive powders
• Rotor tips can be beveled
• Replaceable rotor tips of flexible or abrasion resistant materials
• Roller chain drive with parallel shaft TEFC gearmotor is standard with explosion proof motors of any specified manufacturer available
• Exterior painting and coatings to meet customer specifications when needed